Hampstead Plumbers
With emergency local engineers covering all areas, ready 24 hours a day*, A2B Hampstead Plumbers can provide help with most expediency. Our Hampstead plumbing engineers come with a target response time of less than 2 hours* and we only charge from the time of arrival. No payment is taken until the work is completed and you have signed to say you are satisfied! (deposit may be required for parts purchased).
At A2B Hampstead Plumbers we specialise in solving all types of plumbing problems including burst pipes in Hampstead, shower/bath leaks, toilet faults and blocked drains. We are registered with many Quality Assurance Firms such as the Gas Safe Register, so that you know you are in safe hands.
Your satisfaction and safety is our top priority as we hope that you will not only re-use our services but also recommend us to your friends and family. Our local plumbing team covering Hampstead pride themselves on being fast, efficient and reliable. Whether you have a leaking tap, a boiler breakdown or you have any other plumbing problem, call our free phone line for free quotes and estimates.
Our Local Hampstead plumbers are CRB checked
Recommend us to your friends
Boiler Repair
Our local heating engineers covering Hampstead are GAS Safe Registered, ensuring a high quality of work and peace of mind.
Burst Pipe Repair
If you discover a burst or leaking pipe, our fully trained plumbers will respond within 30-90 minutes* in Hampstead.
Installations
From a simple faucet installation to a full bathroom suite, our experienced plumbers are able to carry out plumbing installations at a time that suits you best.
Professional Services
A2B Hampstead Plumbing services include:
- 24 Hour Plumbers*
- Free Written Quotes
- Domestic & Commercial Service
- Insurance Approved
Example Of Our Services
Descaling
The heat exchanger on a boiler will usually accumulate a layer of calcium when used in hard water areas, impairing the ability to transfer heat to the water. This is only a problem where the system uses continual fresh water; where the system circulates the same water repeatedly, because there is very little calcium in that specific batch of water, the scaling wont happen. The problem is fixed by applying a descaling solution using a machine hooked up directly to the heat exchanger (usually via the washing machine inlet pipes). Once finished, the machine is disconnected, the mains water supply is reconnected, and then all taps are turned on to flush the descaler solution out. Optionally, a water-softener can be installed to the cold water system. Because soft water actively removes scale, this can gradually remove it over time. A boiler heating element with approximately ten years worth of scale on it will descale itself in around six months using a water softener.
